 |
||
Cartridge Guns - Cowboy Style |
||
| Action job | $150 | |
| Gun breakdown & reassembly | $35 | |
| Fireblued screws | $80 | |
| Nickel/Gold plating (pistol) | $200 | |
| Polish gun | $150 | |
| Chamfer forcing cone | $20 | |
| Chamfer chambers | $20 | |
| Mill rear sight slot square | $15 | |
| Shorten barrel, re-crown, reinstall front sight | $90 | |
| Remove and replace barrel | $35 | |
| Replace front sight with .125 brass or steel | $55 | |
| Install and head space new barrel | $60 | |
| Etch S.A.S.S. number on firearm | $15 | |
| Re-cut bolt notches of 1" generation Colts | $75 | |
| Furnish and install ejector housing eustachian | $45 | |
| Drill and ream for handspring | $35 | |
| Re-contour trigger to minimize over travel | $35 | |
| Fit customer's grips | $65 | |
| Fabricate and install "Ivory Micarta" grips | $175 | |
Black Powder Guns - Cowboy Style |
||
| Action job | $135 | |
| Machine .125 slot in hammer | $20 | |
| Replace front sight /125 thick brass blade | $55 | |
| Install new post front sight with 1/8" brass rod | $35 | |
| Shorten barrel, re-crown, reinstall front sight | $90 | |
| New front sight (not for resale) | $15 | |
| Slot cylinders for cappers | $20 | |
| Machine approaches for bolt | $20 | |
| Install cap shields | $85 | |
Cowboy Rifles |
||
| Rifle action job, cartridge or black powder | $135 | |
| Shorten barrels, crown, and cut new sight slot | $75 | |
| Cut dovetail slot | $35 | |
| Install brass bead on front sight | $35 | |
| Install new brass blade front sight on Rossi | $45 | |
| Drill and tap, per hole | $20 | |
| Counter-bore muzzleloaders for "Minnie" bullets | $45 | |
| Re-crown barrels | $45 | |
Shotguns |
||
| Action job | $135 | |
| Install bead | $25 | |
| Cut down barrel | $65 | |
| Polish chambers | $35 | |
| Install recoil pads | $55 | |
| Recoil pads | $20 | |
General Repairs (per hour - plus parts) |
$45 |
|